A car owner who really cares about one’s vehicle and finds the time to give it a proper look, prefers to wash the car oneself with a car detailing steamer. Moreover, knowing how to properly clean a car with the Fortador yourself, you can remove even difficult dirt without damage to the paintwork, optics, and plastic trim.
Removing Stains with a Microfiber
Dirt particles are an indication that there is detergent residue in the vehicle, which can react with the paintwork and cause corrosion over time. Especially if the bodywork is already damaged and scratched. Then the car can be thoroughly dried, or if necessary, polished to a gloss using an auto detail steam cleaner or special wipes.
Do Not Leave the Foam
Do not leave the detergent in the heat for more than 2-3 minutes to prevent it from drying out. The foam dries too quickly, making it harder to remove dirt and harder to rinse off. To cool down, rinse the bodywork with plain water or water and shampoo. This applies especially to dark-colored cars that are heated to +50 degrees or more in the sun.
Use Wax
Waxing after washing protects the bodywork against rust and prevents corrosion, making the entire washing process easier. A protective coating helps prevent insect deposits, pollen, tar, berry sap, bird droppings, and other aggressive dirt from sticking to the paintwork. It is also possible to use a steam machine for car detailing.
Rinse Thoroughly
Do not neglect the finishing rinse. Always rinse the bodywork with demineralized water to prevent streaks. Water dries out quickly in hot weather and does not have time to drain off the dissolved minerals it contains.
Car Wash Tips
Hand washing is the easiest way to clean the vehicle. It has been proven that this method only partially removes dirt from the surface of the car. Summing up all mentioned above, we shall allocate the basic tips on car washing.
- It is not advisable to use excessive pressure when washing the car with auto detailing steamers if the surface of the bodywork has been repaired with putty.
- Wash the car only once or twice a month with specialized detergents as they contain substances that are harmful to the paintwork.
- Avoid getting water inside the car, on the engine, wiring, and lock holes.
- If possible, use a steam cleaner for cars or a cleaning agent recommended by the car manufacturer, as it is suited for the paintwork of your car.
Step-by-step Instructions on How to Wash a Car Manually
How you manually wash your car depends directly on the degree and type of soiling, as well as the available operations. For this reason, the sequence of wash cycles is also recommended. The standard sequence of wash modes for regular washing:
- Soak;
- Power wash;
- Rinsing;
- Waxing;
- Final rinse;
- Drying and wiping.